# Ruuvi sensors -\> Ruuvi Gateway -\> Home Assistant (Easy!)

**URL:** https://f.ruuvi.com/t/ruuvi-sensors-ruuvi-gateway-home-assistant-easy/4445
**Category:** 🇬🇧 Ruuvi Gateway router
**Created:** [28 October 2020 11:48 UTC](https://f.ruuvi.com/t/ruuvi-sensors-ruuvi-gateway-home-assistant-easy/4445 "2020-10-28T11:48:30Z")
**Posts on this page:** 1
**Showing post:** 8

<div class="post-metadata">

### Author: ![Hotzilla](https://f.ruuvi.com/user_avatar/f.ruuvi.com/hotzilla/32/2326_2.png) [@Hotzilla](https://f.ruuvi.com/u/Hotzilla)
#### Post date: [23 January 2021 22:13 UTC](https://f.ruuvi.com/t/ruuvi-sensors-ruuvi-gateway-home-assistant-easy/4445/8 "2021-01-23T22:13:22Z")

</div>

I implemented a merge between few MQTT projects that had not been implemented to support Ruuvi -\> raspberry -\> MQTT -\> Homeassistant with autodiscovery:

![architecture](https://f.ruuvi.com/uploads/default/original/2X/0/0c61f732f3720baa063eae86713e9c3fac5f0546.png)

The installation instructions and code available here:  
[https://github.com/Hotzilla/ruuvicollector-to-homeassistant-mqtt](https://github.com/Hotzilla/ruuvicollector-to-homeassistant-mqtt)

So if you are running Homeassistant at server that doesn’t have bluetooth, it means that you need to push it to another format through network. MQTT works very nicely, as it is very efficient packet format. Also autodiscovery means that you don’t need to configure the sensor at homeassistant at all after installation.

---

_[View the full topic](https://f.ruuvi.com/t/ruuvi-sensors-ruuvi-gateway-home-assistant-easy/4445)._