# Ruuvi and Openhab binding

**URL:** https://f.ruuvi.com/t/ruuvi-and-openhab-binding/3310
**Category:** 🇬🇧 Electronics & programming
**Created:** [22 February 2019 14:34 UTC](https://f.ruuvi.com/t/ruuvi-and-openhab-binding/3310 "2019-02-22T14:34:46Z")
**Posts on this page:** 1
**Showing post:** 4

<div class="post-metadata">

### Author: ![ssalonen](https://f.ruuvi.com/letter_avatar_proxy/v4/letter/s/76d3ee/32.png) [@ssalonen](https://f.ruuvi.com/u/ssalonen)
#### Post date: [27 February 2019 11:20 UTC](https://f.ruuvi.com/t/ruuvi-and-openhab-binding/3310/4 "2019-02-27T11:20:35Z")

</div>

@otso @ptrapnes Hi guys

Hope you did not start work on this yet.

It’s already been originally discussed here: [Collecting RuuviTag measurements and displaying them with Grafana](https://f.ruuvi.com/t/collecting-ruuvitag-measurements-and-displaying-them-with-grafana/267/201?u=ssalonen)

PR is here: [https://github.com/openhab/openhab2-addons/pull/4913](https://github.com/openhab/openhab2-addons/pull/4913) (note that it required some fixes to bluez bundle as well to detect devices based on manufacturer id)

It’s already working (with some unnecessary logging), final stages of review. I welcome you to give feedback and test it out

UPDATE: the binding has been merged, and will be part of standard openHAB 2.5.0 release. You can probably use 2.5.0-snapshot version as well until then

---

_[View the full topic](https://f.ruuvi.com/t/ruuvi-and-openhab-binding/3310)._