# Programming RuuviTag with BLED112

**URL:** https://f.ruuvi.com/t/programming-ruuvitag-with-bled112/538
**Category:** 🇬🇧 Electronics & programming
**Created:** [23 July 2017 15:21 UTC](https://f.ruuvi.com/t/programming-ruuvitag-with-bled112/538 "2017-07-23T15:21:38Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![NullMember](https://f.ruuvi.com/user_avatar/f.ruuvi.com/nullmember/32/34_2.png) [@NullMember](https://f.ruuvi.com/u/NullMember)
#### Post date: [23 July 2017 15:21 UTC](https://f.ruuvi.com/t/programming-ruuvitag-with-bled112/538/1 "2017-07-23T15:21:38Z")

</div>

Hello everyone  
I want to program my RuuviTag with BLED112. BLED112 have easily brickable design. Is there anyone tried programming RuuviTag with BLED112 using Espruino IDE?

---

<div class="post-metadata">

### Author: ![otso](https://f.ruuvi.com/user_avatar/f.ruuvi.com/otso/32/1651_2.png) [@otso](https://f.ruuvi.com/u/otso)
#### Post date: [24 July 2017 09:33 UTC](https://f.ruuvi.com/t/programming-ruuvitag-with-bled112/538/2 "2017-07-24T09:33:19Z")

</div>

I’m not sure if BLED112 is usable, as it represents itself as a virtual com port rather than USB-BLE device by default (if my memory serves me correctly, it’s been years since I last used one of their dongles). Personally I’ve used CSR8510-based dongle on Windows 7 and 8.1

---

<div class="post-metadata">

### Author: ![NullMember](https://f.ruuvi.com/user_avatar/f.ruuvi.com/nullmember/32/34_2.png) [@NullMember](https://f.ruuvi.com/u/NullMember)
#### Post date: [25 July 2017 12:58 UTC](https://f.ruuvi.com/t/programming-ruuvitag-with-bled112/538/3 "2017-07-25T12:58:47Z")

</div>

Thanks for your reply. I think I must buy one generic USB BLE adapter 🙂