# Grafana for newbies

**URL:** https://f.ruuvi.com/t/grafana-for-newbies/982
**Category:** 🇬🇧 RuuviTag & RuuviTag Pro sensors
**Created:** [7 May 2018 11:13 UTC](https://f.ruuvi.com/t/grafana-for-newbies/982 "2018-05-07T11:13:48Z")
**Posts on this page:** 1
**Showing post:** 2

<div class="post-metadata">

### Author: ![Juha](https://f.ruuvi.com/letter_avatar_proxy/v4/letter/j/b5e925/32.png) [@Juha](https://f.ruuvi.com/u/Juha)
#### Post date: [8 May 2018 21:01 UTC](https://f.ruuvi.com/t/grafana-for-newbies/982/2 "2018-05-08T21:01:19Z")

</div>

Have you already explored [this](https://f.ruuvi.com/t/collecting-ruuvitag-measurements-and-displaying-them-with-grafana/267) topic?

Here are also some details:

> [@Collecting RuuviTag measurements and displaying them with Grafana](https://f.ruuvi.com/t/collecting-ruuvitag-measurements-and-displaying-them-with-grafana/267/17):
>
> Hello Mikael, Start grafana: sudo systemctl enable grafana Point your browser to your grafana installation, e.g. [http://ruuvi.local](http://ruuvi.local) or http://IP\_ADDRESS:3000 Edit the mac values in grafana dashboards EDIT: New image runs on [http://raspberrypi.local](http://raspberrypi.local) or http://IP\_ADDRESS, i.e. on port 80. Therefore there is no need to add :3000 anymore to URL

> [@Collecting RuuviTag measurements and displaying them with Grafana](https://f.ruuvi.com/t/collecting-ruuvitag-measurements-and-displaying-them-with-grafana/267/22):
>
> Hi, you need to sign in (admin/admin, please change) Click on frame of the panel and then “edit” Open a measurement window and change mac address. You’ll have “known” mac addresses in dropdown menu.

Or can you describe, how the tags are not recognized properly?

---

_[View the full topic](https://f.ruuvi.com/t/grafana-for-newbies/982)._