# Connection to Victron and Homeassistant at the same time

**URL:** https://f.ruuvi.com/t/connection-to-victron-and-homeassistant-at-the-same-time/7735
**Category:** 🇬🇧 RuuviTag & RuuviTag Pro sensors
**Created:** [5 October 2025 13:14 UTC](https://f.ruuvi.com/t/connection-to-victron-and-homeassistant-at-the-same-time/7735 "2025-10-05T13:14:32Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![jaja](https://f.ruuvi.com/letter_avatar_proxy/v4/letter/j/ee7513/32.png) [@jaja](https://f.ruuvi.com/u/jaja)
#### Post date: [5 October 2025 13:14 UTC](https://f.ruuvi.com/t/connection-to-victron-and-homeassistant-at-the-same-time/7735/1 "2025-10-05T13:14:32Z")

</div>

Hi,

is it possible to connect the sensors to victron cebro and Home assistant at the same time, or can I share the data recieved from Victron and send them to homeassisant ? I need temperatures in both systems.

Thanks

---

<div class="post-metadata">

### Author: ![Marko](https://f.ruuvi.com/user_avatar/f.ruuvi.com/marko/32/3071_2.png) [@Marko](https://f.ruuvi.com/u/Marko)
#### Post date: [6 October 2025 01:01 UTC](https://f.ruuvi.com/t/connection-to-victron-and-homeassistant-at-the-same-time/7735/2 "2025-10-06T01:01:05Z")

</div>

Hello @jaja

Thanks for your message!

Yes, RuuviTag sensors send Bluetooth advertisements actively to their surroundings, so any system that can listen to Bluetooth advertisements can pick them up, no pairing is required.

I am unfortunately unaware if you could forward/relay data collected to Victron’s system, this is system specific and this information is best found on Victron website.