# Beehive Monitor **URL:** https://f.ruuvi.com/t/beehive-monitor/463 **Category:** 🇬🇧 RuuviLab (article comments) **Created:** [29 June 2017 09:44 UTC](https://f.ruuvi.com/t/beehive-monitor/463 "2017-06-29T09:44:01Z") **Posts on this page:** 1 **Showing post:** 2
### Author: ![lauri](https://f.ruuvi.com/user_avatar/f.ruuvi.com/lauri/32/18_2.png) [@lauri](https://f.ruuvi.com/u/lauri) #### Post date: [26 March 2018 19:11 UTC](https://f.ruuvi.com/t/beehive-monitor/463/2 "2018-03-26T19:11:11Z")
Just linking to this topic which has good discussion about beehive monitoring: > [@Bee hive measurements](https://f.ruuvi.com/t/bee-hive-measurements/305): > > Hi Hope this is the right place to post! I want to use a Ruuvi tag in my beehive to measure temperature and humidity. Could I log the data on something like a Raspberry Pi, which would be located in my shed, which is three metres away from the hive. I have a deep cycle battery charged by a solar panel on the shed roof. I would like to record the data at half hour intervals and store it then display the readings on a chart on the RPi when I visit the hive site. Also, if possible, use a seco… --- _[View the full topic](https://f.ruuvi.com/t/beehive-monitor/463)._