Troubleshooting


About the Troubleshooting category (2)
transfer the data measured by ruuviTag to my influxDB database (13)
One tag is dying or? (5)
Cannot get Ruuvi Tag to work with Segger (14)
No connection at High humidity(temp) (14)
Put original firmware back (3)
Uncaught Error: Module Ruuvitag not found (7)
Switching firmware from Weather station to Eddystone (13)
Ruuvi bluetooth range (6)
Help! Error when building Ruuvi using Segger SES on Windows 10 x64 (2)
Configuring Ruuvi? (4)
Acceleration greater than 2G (2)
Configuring Ruuvi Tag as Eddystone EID but get 133 error ( 2 ) (21)
Air pressure is too low (12)
Recovery of Ruuvitag from Scratch (3)
Red led stays on after firmware update ( 2 ) (31)
Battery Values not correct (3)
Adding Manufacter Data or Changing local name (16)
Payload format, Ingics gateway, Mqtt, Node Red (8)
Unable to get sensor data (2)
Cannot flask Eddystone DFU files (2)
Ruuvitag_sensor doesn't find devices on raspberry pi 3 (6)
--debug-mode doesn't skip the revision checking (2)
Temp rounding to nearest 1 degree C (2)
After running for 2 months, sensor started solid red/flash and no BLE beacon (3)
Inaccurate readings (7)
Python App Problems: Computer/Bluetooth Differences? (2)
No reaction from the Beacon (3)
Minimium install to get temperature to raspberry pi (5)
Eddystone beacon not showing up for ios (4)